🧹 nixify polybar

modules/desktop/polybar/colors.ini

@@ -1,18 +0,0 @@
-[colors]
-background = #282a36
-current-line = #44475a
-foreground = #f8f8f2
-comment = #6272a4
-
-cyan = #8be9fd
-green = #50fa7b
-orange = #ffb86c
-pink = #ff79c6
-purple = #bd93f9
-red = #ff5555
-yellow = #f1fa8c
-
-foreground-alt = ${self.foreground}
-background-alt = #44475a
-primary = ${self.pink}
-secondary = ${self.green}

modules/desktop/polybar/config.ini

@@ -1,279 +0,0 @@
-; Global WM Settings
-
-[global/wm]
-; Adjust the _NET_WM_STRUT_PARTIAL top value
-; Used for top aligned bars
-margin-bottom = 0
-
-; Adjust the _NET_WM_STRUT_PARTIAL bottom value
-; Used for bottom aligned bars
-margin-top = 0
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-;; File Inclusion
-; include an external file, like module file, etc.
-
-#include-file = ~/.config/polybar/colors.ini
-#include-file = ~/.config/polybar/modules.ini
-#include-file = ~/.config/polybar/custom/modules.ini
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-[bar/bottom]
-; Use either of the following command to list available outputs:
-; If unspecified, the application will pick the first one it finds.
-; $ polybar -m | cut -d ':' -f 1
-; $ xrandr -q | grep " connected" | cut -d ' ' -f1
-monitor = ${env:MONITOR}
-
-; Use the specified monitor as a fallback if the main one is not found.
-monitor-fallback =
-
-; Require the monitor to be in connected state
-; XRandR sometimes reports my monitor as being disconnected (when in use)
-monitor-strict = false
-
-; Tell the Window Manager not to configure the window.
-; Use this to detach the bar if your WM is locking its size/position.
-override-redirect = false
-
-; Put the bar at the bottom of the screen
-bottom = true
-
-; Prefer fixed center position for the `modules-center` block
-; When false, the center position will be based on the size of the other blocks.
-fixed-center = true
-
-; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
-; the percentage can optionally be extended with a pixel offset like so:
-; 50%:-10, this will result in a width or height of 50% minus 10 pixels
-width = 100%
-height = 30
-
-; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
-; the percentage can optionally be extended with a pixel offset like so:
-; 50%:-10, this will result in an offset in the x or y direction 
-; of 50% minus 10 pixels
-offset-x = 0
-offset-y = 0
-
-; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
-background = ${colors.background-alt}
-
-; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
-foreground = ${colors.foreground}
-
-; Background gradient (vertical steps)
-;   background-[0-9]+ = #aarrggbb
-;;background-0 = 
-
-; Value used for drawing rounded corners
-; Note: This shouldn't be used together with border-size because the border 
-; doesn't get rounded
-; Individual top/bottom values can be defined using:
-;   radius-{top,bottom}
-radius-top = 0.0
-radius-bottom = 0.0
-
-; Under-/overline pixel size and argb color
-; Individual values can be defined using:
-;   {overline,underline}-size
-;   {overline,underline}-color
-line-size = 3
-line-color = ${colors.pink}
-
-; Values applied to all borders
-; Individual side values can be defined using:
-;   border-{left,top,right,bottom}-size
-;   border-{left,top,right,bottom}-color
-; The top and bottom borders are added to the bar height, so the effective
-; window height is:
-;   height + border-top-size + border-bottom-size
-; Meanwhile the effective window width is defined entirely by the width key and
-; the border is placed withing this area. So you effectively only have the
-; following horizontal space on the bar:
-;   width - border-right-size - border-left-size
-border-size = 0
-border-bottom-color = ${colors.pink}
-
-; Number of spaces to add at the beginning/end of the bar
-; Individual side values can be defined using:
-;   padding-{left,right}
-padding = 0
-
-; Number of spaces to add before/after each module
-; Individual side values can be defined using:
-;   module-margin-{left,right}
-module-margin = 0
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-; Fonts are defined using <font-name>;<vertical-offset>
-; Font names are specified using a fontconfig pattern.
-;   font-0 = NotoSans-Regular:size=8;2
-;   font-1 = MaterialIcons:size=10
-;   font-2 = Termsynu:size=8;-1
-;   font-3 = FontAwesome:size=10
-; See the Fonts wiki page for more details
-
-font-0 = "FiraCode Nerd Font:size=11;0"
-
-; Modules are added to one of the available blocks
-;   modules-left = cpu ram
-;   modules-center = xwindow xbacklight
-;   modules-right = ipc clock
-
-modules-left = cpu memory wlan eth battery
-modules-center = bspwm
-modules-right = pulseaudio date powermenu
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-; The separator will be inserted between the output of each module
-separator =
-
-; Opacity value between 0.0 and 1.0 used on fade in/out
-dim-value = 1.0
-
-; Value to be used to set the WM_NAME atom
-; If the value is empty or undefined, the atom value
-; will be created from the following template: polybar-[BAR]_[MONITOR]
-; NOTE: The placeholders are not available for custom values
-wm-name = 
-
-; Locale used to localize various module data (e.g. date)
-; Expects a valid libc locale, for example: sv_SE.UTF-8
-locale = 
-
-; Position of the system tray window
-; If empty or undefined, tray support will be disabled
-; NOTE: A center aligned tray will cover center aligned modules
-;
-; Available positions:
-;   left
-;   center
-;   right
-;   none
-tray-position = right
-
-; If true, the bar will not shift its
-; contents when the tray changes
-tray-detached = false
-
-; Tray icon max size
-tray-maxsize = 16
-
-; Background color for the tray container 
-; ARGB color (e.g. #f00, #ff992a, #ddff1023)
-; By default the tray container will use the bar
-; background color.
-tray-background = ${colors.background-alt}
-
-; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
-tray-offset-x = 0
-tray-offset-y = 0
-
-; Pad the sides of each tray icon
-tray-padding = 2
-
-; Scale factor for tray clients
-tray-scale = 1.0
-
-; Restack the bar window and put it above the
-; selected window manager's root
-;
-; Fixes the issue where the bar is being drawn
-; on top of fullscreen window's
-;
-; Currently supported WM's:
-;   bspwm
-;   i3 (requires: `override-redirect = true`)
-wm-restack = bspwm
-
-; Set a DPI values used when rendering text
-; This only affects scalable fonts
-; dpi = 
-
-; Enable support for inter-process messaging
-; See the Messaging wiki page for more details.
-enable-ipc = true
-
-; Fallback click handlers that will be called if
-; there's no matching module handler found.
-click-left = 
-click-middle = 
-click-right =
-scroll-up =
-scroll-down =
-double-click-left =
-double-click-middle =
-double-click-right =
-
-; Requires polybar to be built with xcursor support (xcb-util-cursor)
-; Possible values are:
-; - default   : The default pointer as before, can also be an empty string (default)
-; - pointer   : Typically in the form of a hand
-; - ns-resize : Up and down arrows, can be used to indicate scrolling
-cursor-click = pointer
-cursor-scroll = ns-resize
-
-;; WM Workspace Specific
-
-; bspwm
-;;scroll-up = #bspwm.next
-;;scroll-down = #bspwm.prev
-;;scroll-up = bspc desktop -f prev.local
-;;scroll-down = bspc desktop -f next.local
-
-;i3
-;;scroll-up = i3wm-wsnext
-;;scroll-down = i3wm-wsprev
-;;scroll-up = i3-msg workspace next_on_output
-;;scroll-down = i3-msg workspace prev_on_output
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
-
-
-;; Application Settings
-
-[settings]
-; The throttle settings lets the eventloop swallow up til X events
-; if they happen within Y millisecond after first event was received.
-; This is done to prevent flood of update event.
-;
-; For example if 5 modules emit an update event at the same time, we really
-; just care about the last one. But if we wait too long for events to swallow
-; the bar would appear sluggish so we continue if timeout
-; expires or limit is reached.
-throttle-output = 5
-throttle-output-for = 10
-
-; Time in milliseconds that the input handler will wait between processing events
-;throttle-input-for = 30
-
-; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
-screenchange-reload = true
-; Compositing operators
-; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
-;;compositing-background = source
-;;compositing-foreground = over
-;;compositing-overline = over
-;;compositing-underline = over
-;;compositing-border = over
-
-; Define fallback values used by all module formats
-;format-foreground = 
-;format-background = 
-;format-underline =
-;format-overline =
-;format-spacing =
-;format-padding =
-;format-margin =
-;format-offset =
-
-; Enables pseudo-transparency for the bar
-; If set to true the bar can be transparent without a compositor.
-pseudo-transparency = false
-
-;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

modules/desktop/polybar/default.nix

@@ -2,7 +2,6 @@
 
 {
   home-manager.users.moritz = {
-
     services.polybar = {
       enable = true;
       package = pkgs.polybar.override { pulseSupport = true; };
@@ -11,9 +10,182 @@
                            MONITOR=$m polybar --reload bottom &
                          done
       '';
-      config = ./config.ini;
+      config = let
-      extraConfig = builtins.readFile ./modules.ini
+        colors = {
-        + builtins.readFile ./colors.ini;
+          background = "#282a36";
+          current-line = "#44475a";
+          foreground = "#f8f8f2";
+          comment = "#6272a4";
+
+          cyan = "#8be9fd";
+          green = "#50fa7b";
+          orange = "#ffb86c";
+          pink = "#ff79c6";
+          purple = "#bd93f9";
+          red = "#ff5555";
+          yellow = "#f1fa8c";
+        };
+      in {
+        "global/wm" = { margin-top = 5; };
+        "bar/bottom" = {
+          # position
+          monitor = "\${env:MONITOR}";
+          bottom = true;
+          width = "100%:-20";
+          heigth = 25;
+          background = colors.background;
+          foreground = colors.foreground;
+          radius = 10;
+          offset-x = 10;
+          offset-y = 5;
+
+          line-size = 3;
+          line-color = colors.pink;
+
+          font-0 = "FiraCode Nerd Font:size=10;0";
+
+          modules-left = "cpu memory wlan eth battery";
+          modules-center = "bspwm";
+          modules-right = "pulseaudio date";
+
+          wm-restack = "bspwm";
+
+          cursor-click = "pointer";
+          cursor-scroll = "ns-resize";
+        };
+        "module/battery" = {
+          type = "internal/battery";
+          battery = "BATT";
+          adapter = "ACAD";
+          time-format = "%H:%M";
+
+          format-charging = "<animation-charging>  <label-charging>";
+          format-charging-underline = colors.green;
+          format-charging-padding = 1;
+
+          format-discharging = "<animation-discharging>  <label-discharging>";
+          format-discharging-underline = colors.red;
+          format-discharging-padding = 1;
+
+          format-full = "<label-full>";
+          format-full-underline = colors.green;
+          format-full-padding = 1;
+
+          label-charging = "%percentage%% %time% remaining";
+          label-discharging = "%percentage%% %time% remaining";
+          label-full = "Fully charged";
+
+          animation-charging-0 = "";
+          animation-charging-1 = "";
+          animation-charging-2 = "";
+          animation-charging-3 = "";
+          animation-charging-4 = "";
+          animation-charging-framerate = 500;
+
+          animation-discharging-0 = "";
+          animation-discharging-1 = "";
+          animation-discharging-2 = "";
+          animation-discharging-3 = "";
+          animation-discharging-4 = "";
+          animation-discharging-framerate = 500;
+        };
+        "module/bspwm" = {
+          type = "internal/bspwm";
+
+          label-focused = "";
+          label-focused-foreground = colors.purple;
+          label-focused-padding = 1;
+
+          label-occupied = "";
+          label-occupied-foreground = colors.comment;
+          label-occupied-padding = 1;
+
+          label-urgent = "";
+          label-urgent-foreground = colors.red;
+          label-urgent-padding = 1;
+
+          label-empty = "";
+          label-empty-foreground = colors.comment;
+          label-empty-padding = 1;
+
+          label-separator = " ";
+          label-separator-foreground = colors.cyan;
+          label-separator-padding = 1;
+
+          pin-workspaces = true;
+        };
+        "module/cpu" = {
+          type = "internal/cpu";
+          interval = 2;
+          format-prefix = " ";
+          format-prefix-foreground = colors.red;
+          format-underline = colors.red;
+          format-padding = 2;
+          label = "%percentage:2%%";
+        };
+        "module/date" = {
+          type = "internal/date";
+          interval = 5;
+
+          date = "%A";
+          date-alt = "%Y-%m-%d";
+
+          time = "%H:%M";
+          time-alt = "%H:%M:%S";
+
+          format-underline = colors.purple;
+          format-padding = 2;
+
+          label = "%date% %time%";
+
+          click-middle = "${pkgs.kitty}/bin/kitty cal -m3";
+        };
+        "module/memory" = {
+          type = "internal/memory";
+          interval = 2;
+          format-prefix = " ";
+          format-prefix-foreground = colors.green;
+          format-underline = colors.green;
+          format-padding = 2;
+
+          label = "%percentage_used%%";
+        };
+        "module/pulseaudio" = {
+          type = "internal/pulseaudio";
+
+          format-volume = "<ramp-volume> <label-volume>";
+          format-padding = 2;
+          format-underline = colors.orange;
+          label-volume = "%percentage%%";
+          label-volume-foreground = colors.foreground;
+
+          label-muted = "婢 muted";
+          label-muted-foreground = colors.red;
+          ramp-volume-0 = "奄";
+          ramp-volume-1 = "奔";
+          ramp-volume-2 = "墳";
+
+          click-middle = "${pkgs.pavucontrol}/bin/pavucontrol";
+        };
+        "module/eth" = {
+          type = "internal/network";
+          interface = "enp42s0";
+          interval = 3;
+          format-connected-underline = colors.purple;
+          format-connected = "<label-connected>";
+          label-connected = "祝 %upspeed%  %downspeed%";
+          format-connected-padding = 2;
+        };
+        "module/wlan" = {
+          type = "internal/network";
+          interface = "wlp1s0";
+          interval = 3;
+          format-connected-underline = colors.purple;
+          format-connected = "<label-connected>";
+          label-connected = "祝 %upspeed%  %downspeed%";
+          format-connected-padding = 2;
+        };
+      };
     };
   };
 }

modules/desktop/polybar/modules.ini

@@ -1,236 +0,0 @@
-[module/battery]
-type= internal/battery
-battery= BATT
-adapter= ACAD
-
-; see "man date" for details on how to format the time string
-; NOTE: if you want to use syntax tags here you need to use %%{...}
-; Default: %H:%M:%S
-time-format = %H:%M
-
-; Available tags:
-;   <label-charging> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-;   <animation-charging>
-format-charging = <animation-charging>  <label-charging>
-format-charging-underline = ${colors.green}
-format-charging-padding = 1
-
-; Available tags:
-;   <label-discharging> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-;   <animation-discharging>
-format-discharging = <ramp-capacity>  <label-discharging>
-format-discharging-underline = ${colors.red}
-format-discharging-padding = 1
-
-; Available tags:
-;   <label-full> (default)
-;   <bar-capacity>
-;   <ramp-capacity>
-format-full = <label-full>
-format-full-underline = ${colors.green}
-format-full-padding = 1
-
-; Available tokens:
-;   %percentage% (default) - is set to 100 if full-at is reached
-;   %percentage_raw%
-;   %time%
-;   %consumption% (shows current charge rate in watts)
-label-charging = %percentage%% %time% remaining
-
-; Available tokens:
-;   %percentage% (default) - is set to 100 if full-at is reached
-;   %percentage_raw%
-;   %time%
-;   %consumption% (shows current discharge rate in watts)
-label-discharging = %percentage%% %time% remaining
-
-; Available tokens:
-;   %percentage% (default) - is set to 100 if full-at is reached
-;   %percentage_raw%
-label-full = Fully charged
-
-; Only applies if <ramp-capacity> is used
-ramp-capacity-0 =  
-ramp-capacity-1 =  
-ramp-capacity-2 =  
-ramp-capacity-3 =  
-ramp-capacity-4 =  
-
-; Only applies if <bar-capacity> is used
-bar-capacity-width = 10
-
-; Only applies if <animation-charging> is used
-animation-charging-0 = 
-animation-charging-1 = 
-animation-charging-2 = 
-animation-charging-3 = 
-animation-charging-4 = 
-; Framerate in milliseconds
-animation-charging-framerate = 750
-
-; Only applies if <animation-discharging> is used
-animation-discharging-0 = 
-animation-discharging-1 = 
-animation-discharging-2 = 
-animation-discharging-3 = 
-animation-discharging-4 = 
-; Framerate in milliseconds
-animation-discharging-framerate = 500
-
-[module/bspwm]
-type = internal/bspwm
-
-reverse-scroll = false
-
-label-focused = 
-label-focused-foreground = ${colors.purple}
-label-focused-padding = 1
-
-label-occupied = 
-label-occupied-foreground = ${colors.comment}
-label-occupied-padding = 1
-
-label-urgent = 
-label-urgent-foreground = ${colors.red}
-label-urgent-padding = 1
-
-label-empty = 
-label-empty-foreground = ${colors.comment}
-; label-empty-background = ${colors.pink}
-label-empty-padding = 1
-
-label-separator = " "
-label-separator-foreground = ${colors.cyan}
-label-separator-padding =  1
-
-pin-workspaces = true
-
-[module/cpu]
-type = internal/cpu
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.red}
-format-underline = ${colors.red}
-format-padding = 2
-label = %percentage:2%%
-
-[module/date]
-type = internal/date
-interval = 5
-
-date = "%A"
-date-alt = " %Y-%m-%d"
-
-time = %H:%M
-time-alt = %H:%M:%S
-
-format-underline = ${colors.purple}
-format-padding = 2
-
-label = %date% %time%
-
-[module/eth]
-type = internal/network
-interface = enp42s0
-interval = 3.0
-
-format-connected-underline = ${colors.purple}
-format-padding = 2
-label-connected = "%upspeed% %downspeed%"
-
-[module/memory]
-type = internal/memory
-interval = 2
-format-prefix = " "
-format-prefix-foreground = ${colors.green}
-format-underline = ${colors.green}
-format-padding = 2
-
-label = %percentage_used%%
-click-left=kitty bpytop
-
-[module/powermenu]
-type = custom/menu
-
-expand-right = false
-
-format-spacing = 1
-format-padding = 2
-
-label-open = ""
-label-open-foreground = ${colors.orange}
-label-close = ""
-label-close-foreground = ${colors.red}
-label-separator = |
-label-separator-foreground = ${colors.cyan}
-
-menu-0-0 = " "
-menu-0-0-exec = #powermenu.open.1
-menu-0-1 = " "
-menu-0-1-exec = #powermenu.open.2
-menu-0-2 = " "
-menu-0-2-exec = #powermenu.open.3
-
-menu-1-0 = " "
-menu-1-0-exec = systemctl reboot
-
-menu-2-0 = " "
-menu-2-0-exec = systemctl poweroff
-
-menu-3-0 = " "
-menu-3-0-exec = systemctl hibernate
-
-
-[module/pulseaudio]
-type = internal/pulseaudio
-
-format-volume = <label-volume> <bar-volume>
-format-padding = 2
-format-underline = ${colors.orange}
-label-volume =   %percentage%%
-label-volume-foreground = ${colors.foreground}
-
-label-muted = " muted"
-label-muted-foreground = ${colors.foreground-alt}
-
-bar-volume-width = 12
-bar-volume-foreground-0 = ${colors.green}
-bar-volume-foreground-1 = ${colors.green}
-bar-volume-foreground-2 = ${colors.green}
-bar-volume-foreground-3 = ${colors.green}
-bar-volume-foreground-4 = ${colors.green}
-bar-volume-foreground-5 = ${colors.orange}
-bar-volume-foreground-6 = ${colors.orange}
-bar-volume-foreground-7 = ${colors.orange}
-bar-volume-foreground-8 = ${colors.red}
-bar-volume-gradient = true
-bar-volume-indicator = |
-bar-volume-indicator-font = 2
-bar-volume-fill = -
-bar-volume-fill-font = 2
-bar-volume-empty = -
-bar-volume-empty-font = 2
-bar-volume-empty-foreground = ${colors.foreground}
-
-click-middle=pavucontrol
-click-right=~/bin/cycle_sinks.sh
-
-[module/wlan]
-type = internal/network
-interface = wlp1s0
-interval = 3.0
-
-format-connected-underline = ${colors.purple}
-label-connected = "%upspeed% %downspeed%"
-format-padding = 2
-
-[module/xwindow]
-type = internal/xwindow
-format = <label>
-label = %title:0:30:...%
-format-underline = ${colors.orange}
-format-padding = 2